STIHL

MS 251 C-BE - MS 251 C-BE 18" | 23 RM3 68

Chainsaw

479.99

Specifications

Features

Anti-Vibration System

STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.

Bumper Spikes

These spikes prevent pull-in and provide better control, making cutting easier.

High-Tech Polymer Housings

Housings are lightweight, withstand greater impact, and are corrosion-resistant.

Made in America

A majority of STIHL products sold in America are made in America of U.S. and global materials.

Master Control Lever™

The Master Control Lever™ is an easy to use single lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.

Quick Chain Adjuster (QCA) (B)

The Quick Chain Adjuster (QCA) (B) allows the user to adjust the tension of the chain without the use of tools. This allows for easy chain adjustment.

Reduced-Emission Engine Technology—Caring for Nature

The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

STIHL Easy2Start™ (E)

The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.

Throttle Trigger Lockout

This safety feature must be depressed before the trigger can be activated.

Toolless Fuel and Oil Caps with Retainers

Simply lift the lever and twist the caps to remove or tighten. There’s no need to use a tool to tighten or loosen.

Vibration level left	12.8 ft/s²
Vibration level right	12.8 ft/s²
Bar length	18 in
Device weight without refuelling	11.5 lb
System weight without refuelling	13.5 lb
Displacement	2.8 cu-in
Displacement	2.8 in³
Device length with bumper spike	16.7 in
Power	2.9 BHP
Power	2.948 BHP
Power-to-weight ratio	3.9 lb/hp
Groove width	50 in
Saw chain pitch	.325"

MS 251 C-BE - MS 251 C-BE 18" | 23 RM3 68

479.99

Specifications

Vibration level left

Vibration level right

Bar length

Device weight without refuelling

System weight without refuelling

Displacement