RAPID™ Micro™ Harvester Special (RMHS) .404" | 0.080" - RAPID™ Micro™ .040" | 40 RMHS 50' Reel 36200000740

Cutter Heels

Patented, asymmetrically shaped cutter heels enlarge the running face. This considerably reduces the pressure on the cutter and extends the service life.

Cutter Links

Semi-chisel with slim, straight sided cutter.

Drive Links

The drive links are reinforced around the rivet holes (A).The part of the drive link (B) which runs in the guide bar groove is recessed thickness of the drive link equals 0.080”.

STIHL OILOMATIC® System

The patented OILOMATIC® system found on STIHL saw chains is an exclusive selling feature. This is a specially engineered groove designed to channel oil to the critical wear areas. This superior lubrication feature gives the customer extended chain life with lowered tendency for stretching.A further development of the OILOMATIC® system is the oil reservoir next to the OILOMATIC® channel. These reservoirs fill up with oil when the drive links pass the guide bar’s inlet hole and are emptied by the centrifugal force acting at the bar nose. This provides more oil for distribution to the chain, groove and rails and protects against premature wear. Simply put, it brings the oil to where it is needed. Available on all STIHL saw chains.

Tie Straps

Asymmetrically shaped running faces increase the wear surface. This considerably reduces the pressure on the tie straps and extends the service life of the chain.

Chain pitch	10,26mm/.404"
Drive link gauge	2,0mm/.080"
Number of drive links	740 Tg

RAPID™ Micro™ Harvester Special (RMHS) .404" | 0.080" - RAPID™ Micro™ .040" | 40 RMHS 50' Reel

579.99

Specifications

Chain pitch

Drive link gauge

Number of drive links

Features

Cutter Heels

Cutter Links

Drive Links

STIHL OILOMATIC® System

Tie Straps